An electronic controlled float switch and strainer assembly designed to sense and remove free air before it can enter the flow meter. Efficiently removing air from the truck delivery while minimizing the amount of the residual product released from the system. The float switch has a wide specific gravity range for product use, and requires NO annual maintenance.

A relay controller is required to actuate the solenoid vent when air is present within the air eliminator vessel, such as the TCS 3000 electonic register. Also required is a valve downstream of the meter to stop flow until air has been removed. Accuracy better than 0.2% of maximum allowed error during product depletion (split compartment) testing.

Size: 2", 3" & 4" 
Voltage: 12 VDC 
Rating: Class 1, Division 2 
Type: SP, SPD & SSD 
Pressure: 150 PSI (10.5 BAR) 
Temperature: -40F to 160F (-40C to 71C) 
Material: Aluminum, Ductile Iron & Stainless Steel (SSD 2" only) 
Seals: FKM, PTFE & Simriz 
Strainer Mesh: 40 Mesh (Stainless Steel)

 

 

 

 

 

 

 

Downloads

Slide
Faça uma Cotação
Faça uma Cotação
Deseja mais informações e/ou alguns números? Preencha este formulário. Queremos saber sobre o seu projeto.
Deseja mais informações e/ou alguns números? Preencha este formulário. Queremos saber sobre o seu projeto.