External Additive Injection Pump & Metering System
Monitor & record additive from a non-TCS additive injection system
External Additive Injection Pump & Metering System
Gammon Technical Products Injection Pump
TCS 5000 Additive Meter
Integrated
The TCS 3000 is designed to easily integrate with your existing additive injection equipment. By doing so, your additive deliveries are tied directly into your fuel delivery process.
Automatic Monitoring
Set your target PPM concentration ratio, and the TCS 3000 register will communicate with an external PLC to ensure accurate additive blend throughout the entire delivery. If the ratio falls out of tolerance for some reason, the TCS 3000 will end the delivery and print the error on the delivery ticket along with the additive volume and PPM ratio.
Auditable
Print additive amounts directly on your delivery tickets. Send additive injection amounts to the home office where it can be consolidated and tracked via the TCS HUB.
External
Cloud-Ready (TCS HUB)
External
External Flow Diagram
The TCS 3000 register will provide a constant signal during product delivery. This signal passes to a PLC that drives an external additive injector controlling the injection rate.
The TCS 3000 also reads an additive meter to ensure the delivery stays within tolerance.
TCS 590908/16/30
8, 16, or 30 Gallon 304SST Tank Assembly with Sight Gauge and 3/8” Drain Valve
500-380SS2D1/2/3
3/8" NPT Oval Gear 0.3 GPM Meter with FMK, Neoprene, or PTFE Seals
TCS 590125
Flow Rate Indicator and Totalizer; Wall-Mounted IP65/NEMA4 ABS Enclosure; 10-30VDC Power
TCS 590902KT
Low Level 3/4” NPT SST Contact Switch with M12
connector and 6” cable - 16” Length Stem
TCS 590105
Single and Dual Suction/Anti-Siphon SST Tube Assembly with Vent and Drierite Tube; 3/8” NPT
TCS 590101
Suction/Anti-Siphon SST Tube Assembly with Vent and Drierite Tube; 3/4” Quick Disconnect
TCS 590109
Suction/Anti-Siphon SST Tube Assembly with Vent and Drierite Tube; 3/4” Quick Disconnect
TCS 590120
1000 mL Graduated Polypropylene Test Cylinder
TCS 590934
Lockable 2" Kamlok Cap with Neoprene Seal - 304 Stainless Steel or Polypropylene
TCS 590942
2" Kamlok F
304 Stainless Steel or Polypropylene
TCS 590946
2" Bulkhead Tank Fitting with Neoprene Seal
304 Stainless Steel or Polypropylene
© 2017 - 2024 Total Control Systems
This website uses cookies to provide you with a great user experience.
