TCS Meter Accessories
Meet additional metering requirements with TCS's full line of flow meter accessories.
Interchangeable Meter Comparisons
Single Capsule to TCS 700-40SPA
Single Capsule to TCS 700-45SPS
Dual Capsule to TCS 700-60SPA
Triple Capsule to TCS 700-65SPA
Reliable, tested, and accurate integration between your fueling equipment, TCS 3000 register, and the user-friendly TCS HUB.
The OnPoint platform will allow you to go above and beyond the typical fueling process. Efficiently utilize standard features such as permissive-based functions, unattended deliveries, wet hosing with RFID handheld, real-time inventory, and device monitoring for added safety.
The TCS HUB component of OnPoint will allow you to take things to a new level. From the comfort of your office, you can view fuel transactions, customize reports, and data collected from fueling equipment, which is easily exportable in several different file formats to integrate with your back-office software.
Click here to see examples of the TCS OnPoint platform:
Meter Accessories
Total Control Systems offers a complete line of accessories to support TCS flow meters.
Air & Vapor Eliminators
Extract free or accumulated volumes of air or vapor to maintain accuracy.
Electronic Registration
Increase accuracy, security, and productivity with the enhanced functionality of electronic registers.
Mechanical Registration
Totalize & display liquid volume with this rugged, precise mechanical register.
Pulse Transmitter
Send volume data to a remote display, register, computer, or fuel management system (PLC).
Valves
Gain control over liquid flow to the meter allow for presets, safety, pump control, pressure relief, & more!
Miscellaneous Accessories
Increase the functionality of your metering system with these key accessories.
Flow Meters
While the best meter technology depends on the system characteristics, Total Control System's positive displacement flow meters and components selection criteria will vary based on the following specifications: liquid compatibility, flow rate, viscosity, temperature, pressure, suspensions, solids and the pumping technology.
TCS 700 Rotary Meters
The TCS 700 rotary flow meter combines excellent accuracy with low-pressure drop. It's available in a wide range of sizes from 1-1/2" to 6".
TCS 682 Piston Meters
The TCS 682 reciprocating piston flow meter combines outstanding accuracy (0.1% of flow rate) with one of the widest turndown ratios in the industry (250:1).
TCS 500 Oval Gear Meter
The Oval Gear meter is a precise positive displacement flowmeter incorporating a pair of oval geared rotors. These meters are capable of measuring the flow of a broad range of clean liquids
TCS 500 Oval Gear Meter
The Oval Gear meter is a precise positive displacement flowmeter incorporating a pair of oval geared rotors. These meters are capable of measuring the flow of a broad range of clean liquids. Stainless Steel flowmeters are suited to most water-based products, chemicals, and lubricating liquids. The flow meter is available as a blind pulse meter with a non-factored pulse output capable of interfacing to most monitoring and control instrumentation.
- Flow Range: 4 to 180 GPH (15 to 681 LPH)
- Linear Accuracy: Capable of ± 1%
- Repeatability: Capable of 0.03%
- Operating Pressure: Up to 150 PSI (10.5 BAR)
- Temperature Range: -35°F to 176°F (-37°C to 80°C)
- Connections: 3/8" NPT
- Hall Effect Output: 3 wire open collector, 5-24vdc at 20 mA max
- Protection Class: Built to IP66/67 (NEMA 4X)
- Housing: 304 Stainless Steel
- Sintered Gears: 304 Stainless Steel
- Seals: FKM, PTFE or Neoprene Available
700 Rotary Meter
The TCS 700 rotary flow meter combines excellent accuracy with low-pressure drop. The TCS 700 rotary flow meter has a compact size and lightweight design that offers minimal maintenance and long service life. This meter is built with advanced materials of construction for a broad range of measurement applications and is accompanied by a full selection of accessories and electronic registration.
The TCS 700 series rotary flow meter has a simple and efficient meter design consisting of a housing and three rotors that rotate in unison within the measuring chamber. The absence of wear, from no metal-to-metal contact within the chamber, eliminates any deterioration in accuracy and provides a long service life.
The rotors are supported by bearings inserted into two bearing plates, where at the end of each rotor shaft is a timing gear. The timed rotation between each rotor is then transferred through the calibration adjuster to the register, giving a consistent and superior measurement of accuracy.
- Flow: Capable of up to 1,000 GPM (3,785 LPM); Bi-directional Flow
- Linear Accuracy: Capable of ± 0.15% of over the full flow range
- Repeatability: Capable of 0.02% (constant operation conditions with 700SP meters & mechanical registration, using 1 CPS test fluid)
- Viscosity: Will accurately measure liquids up to 1,500,000 SSU (325,000 CPS)
- Temperature: - 40 to 160°F (- 40 to 71°C)
- Approvals: Meets a wide range of weights and measures requirements. (Contact factory for information on specific approvals.)
Flange Connections: 1 1/2” NPT Flange; 1” & 2” Options
The 700 1.5" rotary flow meter is engineered to meter liquid at up to 60 GPM (227 LPM).
Flange Connections: 2” NPT Flange; 1 1/2” Option
The 700 2" rotary flow meter is engineered to meter liquid at up to 100 GPM (380 LPM).
Flange Connections: 2” NPT Flange
The 700 2" rotary flow meter is engineered to meter liquid at up 150 GPM (567 LPM).
Flange Connections: 3” NPT Flange; 2” Option
The 700 3" rotary flow meter is engineered to meter liquid at up to 200 GPM (760 LPM).
Flange Connections: 3” NPT Flange
The 700 3" rotary flow meter is engineered to meter liquid at up to 300 GPM (1,135 LPM).
Flange Connections: 4” NPT Flange; 3” Option
The 700 4" rotary flow meter is engineered to meter liquid at up to 500 GPM (1,893 LPM).
Flange Connections: 4” NPT Flange
The 700 4" rotary flow meter is engineered to meter liquid at up to 600 GPM (2,271 LPM).
Flange Connections: 6” ANSI Flange
The 700 6" rotary flow meter is engineered to meter liquid at up to 800 GPM (3,040 LPM).
Flange Connections: 6” ANSI Flange
The 700 6" rotary flow meter is engineered to meter liquid at up to 1,000 GPM (3,800 LPM).
682 Piston Meter
The TCS 682 reciprocating piston flow meter combines outstanding accuracy (0.1% of flow rate) with one of the widest turndown ratios in the industry (250:1). The TCS 682 reciprocating piston flow meter has a rugged industrial design that is tolerant of changing viscosities, temperatures, and liquids with suspensions and solids.
This proven design has over 80 years of unmatched performance and continues to provide the very best in flow measurement, backed by our industry-leading 10 YEAR WARRANTY (5 YEAR WARRANTY - LPG)!
The TCS 682 series flow meter is a true positive displacement meter that has a unique inline design consisting of three reciprocating pistons operating within their respective measuring chambers. Each piston works in a manner similar to an automobile engine. The pistons are fitted to a wobble plate, which has a shaft extending from its upper surface and a valve pivot attached beneath it.
The valve pivot drives a sliding valve from the piston to piston as a known amount of product flows through each cylindrical bore, controlling the sequence of events in a smooth mechanical motion. This smooth mechanical motion is then transferred through the driveshaft to the register.
- Flow Range: 0.2 to 50 GPM (0.76 to 189 LPM); 250:1 Turndown Ratio
- Linear Accuracy: Capable of +/- 0.1% over flow range
- Repeatability: Capable of 0.01%
- Operating Pressure: 150 PSI (10.5 BAR)
- Temperature Range: - 40 to 160°F (- 40 to 71°C)
- Viscosity Range: Will accurately measure liquids up to 50,000 SSU (11,000 CPS)
- Connections: 1-1/2" NPT Companion Flanges are standard, 1" & 2" NPT optional. BSPT, Slip Weld, and ANSI flanges are available upon request.
- Types: SP, SPA, SPD, AF, SS, SSD, & LP
- Material: Aluminum, Ductile Iron, or Stainless Steel
700 SP - Standard Petroleum Meters
The 700 SP rotary flow meter is designed to meter petroleum products such as gasoline, fuel oils, diesel, bio-diesel, kerosene, vegetable oils, soy oil, motor oils, ethylene glycol (anti-freeze), etc. It is available in 1.5" to 4" sizes.
- 700 SPA - Standard Petroleum Aviation
- 700 SPD - Standard Petroleum Ductile Nodular Iron
- 700 IC - Industrial Products Carbon Bearings
- 700 IP - Industrial Products Stainless Steel Bearings
- 700 AF - All Ferrous
- 700 SS - Stainless Steel
- 700 SSD - Stainless Steel DEF
- 700 LP - Liquefied Petroleum Gas
- 700 SPS - Standard Petroleum Steel
- TCS 700-60
© Total Control Systems 2016 - 2026
This website uses cookies to provide you with a great user experience.
